Back to all

When Metal Meets Metal (Wheel Bearings)

September 4, 2022

What part of your vehicle has little metal balls inside that are lubricated and allow you to cruise on down the road?  They are wheel bearings, and automotive designers might argue they are human beings' second greatest invention of all time (the first is, of course, the wheel!).

You have a wheel bearing at each wheel.  They allow your wheels to turn freely, minimizing friction that would ordinarily slow you down when metal meets metal.  When one of your wheel bearings starts to go bad, it lets you know. A wheel bearing does its work quietly when it's in good health but starts getting noisy when it isn't.  People describe the noise differently.  Sometimes it sounds like road noise, a pulsating, rhythmic, sound.  That pulse speeds up when your vehicle speeds up. 

Here's what's happening when you hear that sound.  As mentioned, the bearing has these little metal balls inside a ring.  They have a lubricant inside to reduce friction between the balls; modern wheel bearings are sealed and they're intended to do their job without any maintenance. 

Wheel bearings take a beating; you hit some rough potholes or go over some uneven railroad tracks. Sometimes water can get into a bearing and reduce the ability of the lubricant to do its job.  Time starts to take its toll, too. When the lubricant isn't reducing friction like it should, the bearing can heat up. One of those little balls can start shedding pieces of metal and soon those shards start grinding up the other balls.  Friction takes over and soon your wheel isn't turning smoothly. That's what's causing the sound.  If a wheel bearing is not fixed, it could eventually seize up completely, and you can be stranded.

It's a lot easier if you heed the early warning signals, that pulsating noise.  Now, sometimes a similar noise can be caused by a bad tire, but in either case, it's important to have it checked out. Our Charlie's Fast Lube Jackson technicians will be able to tell you fairly quickly what the problem is and offer a solution.

Wheel bearings generally don't fail often and usually last from 85,000-100,000 miles/140,000km to 160,000km. But consider them a long-term maintenance item that, once fixed, will keep you heading smoothly to the next destination.

Charlie's Fast Lube Jackson
1901 E. Jackson Blvd.
Jackson, Missouri 63755
575-243-2226
http://www.charliesfastlubejackson.com

Need Service?

Request a Quote

More articles from Charlie's Fast Lube Jackson

Go With the Flow (MAF Sensor Replacement)

April 20, 2025

A driver brought her vehicle into the shop the other day and told us how she was getting lousy fuel economy and that the engine was running rough. Plus, the Check Engine light was on. Our technician checked the code the engine had generated (why the Check Engine light was on) and found the prob... More

Charlie's Fast Lube Jackson Advice on What to Pour into Your Vehicle

April 13, 2025

Changes in vehicle design and manufacture have resulted in changed fluid requirements for our vehicles. With the sophistication of engines, transmissions, differentials, etc., it's best for Jackson residents to always use the proper type of fluid for their vehicle. Using incorrect fluids can act... More

Low Power Mystery (Ignition Coil Service)

April 6, 2025

It's no fun when your vehicle just doesn't run the way it used to. You may notice (especially in cold weather) the engine won't start easily or when it does start, it doesn't run smoothly. It may not have much power at all. You also may have had to stop at the gas station more often, a sign you... More